Key Features
Complete Jobsite Marking KitCombines the Pica Dry 3030 Longlife Pencil with the Pica 2020 Deep Hole Spray Marker for layout work on everything from finished surfaces to deep drilled holes.Marks Almost AnythingThe Pica Dry graphite leads mark dusty, oily, wet, rough, glossy, and dark surfaces, while the 2020 Spray Marker transfers hole locations through drilled holes up to 250 mm deep.Refillable Long-Life ToolsBoth tools are built for repeat daily use with refillable systems designed to reduce waste, lower long-term cost, and stay ready for layout work on the jobsite.
Overview
The Pica Dry 3030 Pencil + Pica 2020 Deep Hole Spray Marker Kit is a complete layout and marking setup built for tradespeople who work across different materials, surfaces, and installation conditions every day. Instead of carrying separate marking tools for rough framing, finished surfaces, and deep-hole transfer work, this kit gives you two specialized tools that cover nearly every common layout situation on the jobsite.
The core of the kit is the Pica Dry 3030 Longlife Automatic Pencil paired with 4030 Black Graphite Refill Leads. The 2.8 mm graphite lead is designed to mark surfaces that standard pencils struggle with, including dusty, rough, oily, wet, glossy, and dark materials. Whether you are laying out on lumber, concrete block, tile, pipe, sheet metal, or finished trim, the Pica Dry gives you a visible, controlled mark with better durability than a traditional carpenter pencil.
The stainless steel guide tube and automatic lead feed help with precision layout in tighter spaces, while the integrated cap sharpener keeps the point clean without needing a separate knife or sharpener. The refillable design also makes it a more practical long-term marking solution instead of relying on disposable pencils or markers.
For hole transfer and hard-to-reach marking, the kit also includes the Pica 2020 Deep Hole Spray Marker. This tool is designed specifically for transferring hole locations through drilled holes up to 250 mm (10 in.) deep. Instead of trying to drag a pencil into a tight hole or awkward angle, the 2020 uses a chalk-based spray burst to leave a highly visible fluorescent mark directly where the hole center lands.
The rotating 360 degree spray arm makes it easier to work inside cabinets, framing cavities, mechanical spaces, or anywhere tool clearance becomes a problem. The spray marker is refillable, uses a manual “zero gas” pump mechanism, and is rated for up to 1,500 shots per fill.
Together, these tools give contractors, installers, remodelers, electricians, plumbers, HVAC technicians, carpenters, and serious DIY users a more complete marking system for everyday layout work. From rough framing and fabrication to finish installs and precision hole transfer, this kit is built to solve the marking problems that slow jobs down.
One Kit for Rough and Finished Work
Layout work changes fast depending on the material in front of you. This kit gives you tools for rough surfaces, finished surfaces, and deep-hole transfer without constantly switching setups.
- Pica Dry marks dusty, glossy, rough, wet, and oily surfaces
- Graphite marks can be wiped from glossy finished materials
- Deep Hole Spray Marker handles difficult transfer locations
Built for Tight Spaces and Deep Holes
Mechanical installs, cabinet work, and retrofit jobs rarely leave perfect access. The deep-hole spray marker and slim stainless guide tube help you mark where standard pencils and markers cannot reach cleanly.
- Marks through drill holes up to 250 mm deep
- 360 degree rotating spray arm for awkward access
- Stainless steel guide tube improves precision layout
Refillable Tools Made for Daily Use
These are jobsite marking tools designed to stay in rotation, not disposable throwaways. Both systems are refillable and designed for repeated use in real-world conditions.
- Refillable graphite lead system
- Refillable chalk spray marker with up to 1,500 shots
- Integrated sharpener built into the Pica Dry cap
What’s in the Box
- (1) Pica Dry 3030 Longlife Automatic Pencil
- (1) Pica 2020 Deep Hole Spray Marker
- (1) Pica 4030 Black Graphite Refill Pack
- (10) Graphite 2B Refill Leads
- (1) Pica 2030 Spray Marker Refill Powder
At a Glance
2.8 mmLead Diameter250 mmMax Spray Marking Depth1,500Shots Per Fill2BGraphite Grade
Key Specifications
| Lead Diameter | 2.8 mm |
|---|---|
| Max Marking Depth | 10-in. (250 mm) |
| Shots Per Fill | Up to 1,500 |
| Lead Type | Graphite 2B |
| Spray Arm | 360 Degree Rotating |
| Marking Type | Graphite + Fluorescent Chalk Spray |
| Made In | Germany |
Built For
CarpentryElectricalPlumbingHVACTile WorkMetalworkingRemodelingHole Transfer LayoutGeneral ContractingDIY / Hobbyist
Pro Tip
Use the Pica Dry for visible layout lines on finished surfaces, then switch to the 2020 Spray Marker when you need accurate hole transfer through cabinets, framing, or thicker materials. On glossy surfaces, wipe marks shortly after layout for easier cleanup.
Tool Nut’s Take
Tool Nut’s Take
One of the most complete jobsite marking setups you can keep in a pouch
This kit covers the two marking situations that usually waste the most time: getting marks to show up on difficult surfaces and transferring holes accurately in tight spaces.
- Who it’s for: Contractors, installers, remodelers, electricians, plumbers, HVAC techs, and serious DIY users doing layout work across different materials every day.
- Why it stands out: You get a versatile refillable construction pencil plus a dedicated deep-hole transfer tool instead of forcing one marker to do everything.
- Worth knowing: The graphite marks can be removed from glossy surfaces with a damp cloth, and the spray marker uses refillable chalk powder instead of aerosol cans.
Common Questions
- What surfaces will the Pica Dry mark on? It is designed to mark dusty, wet, rough, oily, glossy, dark, and finished surfaces.
- How deep can the spray marker transfer a hole location? Up to 250 mm (10 in.) through drilled holes.
- Are both tools refillable? Yes. The pencil uses 2.8 mm refill leads and the spray marker uses refill powder.
- Can marks be removed from finished surfaces? Yes. The graphite and chalk markings are designed to wipe off smooth glossy surfaces more easily.
Reviews
There are no reviews yet.