Key Features
No Predrilling Needed Prepunched holes cut out an extra step during installation. That saves labor time and helps keep hole placement consistent from clip to clip. Built for Accurate Placement The hole layout is designed to support correct fastener positioning. That matters when you need the Simpson Strong-Tie SSC4.25-R50 steel stud clip installed the way it was engineered to perform. Flexible Framing Use This clip works for hard-side or soft-side attachment in cold-formed steel framing and can also be used for u-channel bridging. The 4 inch leg length helps with soft-side connections on wider flanges.
Overview
The Simpson Strong-Tie SSC4.25-R50 steel stud clip is a galvanized cold-formed steel connector built for stud-to-stud and stud-to-structure framing connections. This is a steel stud connector designed for cold-formed steel construction and curtain-wall framing. Model Number: SSC4.25-R50. If you need a rigid utility clip that installs fast and gives you a repeatable connection layout, this is the version with a 4-1/4 inch length, 14 gauge thickness, and a 50-count package.
What makes this connector useful on real jobs is the prepunched hole pattern. You are not stopping to predrill each clip, which helps reduce installation time and keeps the fastener layout where the design intends it to be. Simpson also calls out the intuitive fastener hole positions, and that is not just brochure talk. On framing work, clean hole placement helps the crew install clips more consistently, especially when repeating the same detail across multiple bays or elevations.
The SSC4.25-R50 is part of Simpson Strong-Tie’s SSC connector family, which is built for versatility in cold-formed steel applications. This specific model uses 68 mil steel with a 50 ksi material rating and a G90 galvanized finish. In practical terms, that means you are getting a rigid formed clip with corrosion-resistant coating suited to standard cold-formed steel framing environments where galvanized hardware is specified. The 14 gauge build gives it the stiffness expected for structural connector use without stepping up to the heavier MSSC series.
The 2-1/4 inch by 4 inch geometry and 4-1/4 inch overall length are what define where this clip fits best. Simpson notes that the angle length accommodates either hard-side or soft-side attachment for studs and joists with return lips up to 3/4 inch, and the 4 inch leg length enables soft-side connections for studs and joists with flanges up to 3 inches. That matters if you are laying out connections in steel stud framing and need one clip style that can cover more than one framing condition.
This connector is also suitable for u-channel bridging, which adds another use case beyond basic stud clip duties. For contractors working in curtain-wall construction, bypass framing, header and jamb details, or general cold-formed steel framing, having a utility clip that can handle multiple connection scenarios helps cut down on part changes and field confusion. As always with structural connectors, Simpson specifies that the correct fasteners must be installed in the correct positions to achieve published load values, and all specified fasteners or anchors should be used.
From a jobsite practicality standpoint, this is a straightforward hardware choice for framing crews, panelization shops, and commercial contractors who already work from engineered cold-formed steel details. It is not a generic angle bracket. It is a purpose-built connector from a known structural hardware manufacturer, and the prepunched pattern is part of the system. If your plans call for SSC clips, this pack gives you the exact 4.25 inch, 14 gauge, G90 galvanized version in a 50-count box.
Who should buy it? Cold-formed steel framers, curtain-wall installers, commercial metal framing crews, and builders following specified Simpson connection details. If you need a steel stud clip for repeated framing connections and want the correct geometry, coating, and pack quantity without guessing, the SSC4.25-R50 is the right fit.
Designed for Real Framing Conditions
This clip is made for actual cold-formed steel framing work, not light-duty hardware use. It is built to handle structural connection details where repeatability and proper fastener placement matter.
- Application: curtain-wall construction and general cold-formed steel framing
- Suitable for stud-to-stud and stud-to-structure connections
Hole Pattern That Speeds Up Installation
The big advantage here is simple: the holes are already where they need to be. That helps reduce layout mistakes and saves time compared with field drilling clips or making improvised connections.
- Prepunched holes reduce installation cost by eliminating predrilling
- Fastener hole positions are intended to support accurate clip installation
Works Across Multiple Connection Layouts
If your work moves between soft-side framing, hard-side framing, and bridging details, this connector gives you more flexibility than a one-purpose clip. That can simplify material handling for the crew.
- Angle lengths accommodate hard-side or soft-side attachment for studs and joists with return lips up to 3/4 in.
- 4 in. leg length enables soft-side connections for studs and joists with flanges up to 3 in. and is also suitable for u-channel bridging
What’s in the Box
- (50) Simpson Strong-Tie SSC4.25-R50 galvanized steel stud clips
Key Specifications
| Product Type | Steel stud connector / utility clip |
|---|---|
| Application | Curtain-wall construction |
| Gauge | 14 ga. |
| Thickness | 68 mil |
| Material Strength | 50 ksi |
| Dimensions | 2-1/4 in. x 4 in. |
| Length | 4-1/4 in. |
| Finish | Galvanized (G90) |
| Packaging Quantity | 50 |
Built For
Cold-Formed Steel Construction Curtain-Wall Framing Commercial Framing Stud-to-Structure Connections Stud-to-Stud Connections U-Channel Bridging Construction General Contracting
Pro Tip
With the SSC4.25-R50, do not treat the extra holes as optional layout choices. Follow the engineered fastener pattern for the exact connection detail, because Simpson ties published load values to using the correct fasteners in the correct holes.
Tool Nut’s Take
Tool Nut’s Take
Simpson Strong-Tie SSC4.25-R50 steel stud clip for crews that need the right clip, not a workaround
This is a purpose-built cold-formed steel connector that saves time with prepunched holes and covers several common framing conditions without getting overly specialized.
- Who it’s for: Metal framing contractors, curtain-wall crews, and anyone installing engineered cold-formed steel connections.
- Why it stands out: The 14 gauge 68 mil body, G90 galvanizing, and multi-condition geometry make it a solid utility clip for real framing details, not just a generic bracket.
- Worth knowing: This is sold as a 50-pack of clips, and performance depends on using the specified fasteners and the correct hole pattern for the design.
Common Questions
- What is the SSC4.25-R50 used for? It is used for stud-to-stud and stud-to-structure connections in cold-formed steel construction, including curtain-wall applications.
- What size is this clip? The listed dimensions are 2-1/4 in. x 4 in., with a length of 4-1/4 in.
- What material and finish does it have? This model is 68 mil, 50 ksi steel with a galvanized G90 finish.
- Can it be used for u-channel bridging? Yes. Simpson lists this connector as suitable for u-channel bridging.
Reviews
There are no reviews yet.