Key Features
Built for Decking This Simpson Strong-Tie DSVT3S Deck-Drive DSV Wood Screw is tuned for wood-to-wood fastening in preservative-treated decking and exterior lumber, so you get a fastener matched to the job instead of a generic screw. Drives with Less Effort Low-torque threads are designed to reduce driving resistance, which helps stretch battery life and keeps production moving when you are running long runs of deck screws. Clean Countersink The rimmed flat head with nibs seats cleanly and leaves a finished look on deck boards, while the high-low threaded point helps the screw start fast without a lot of walking.
Overview
Simpson Strong-Tie DSVT3S Deck-Drive (#10 x 3″) T25 DSV Quik Guard Wood Screw, Flat Head, Tan (1000 Pack) is a collated exterior wood screw pack made for the Quik Drive fastening system. This is a collated wood screw designed for wood-to-wood fastening in decking and exterior applications. Model Number DSVT3S. If you are building decks and want faster feed, consistent drive depth, and a screw that is built for preservative-treated lumber, this is the setup.
The core of this screw is jobsite efficiency. Simpson states the low-torque thread design can allow up to 35% more screws to be driven per battery charge. That matters when you are fastening hundreds or thousands of boards and do not want to keep swapping batteries or fighting a screw that takes extra effort to seat. The high-low thread with Type-17 style fast-start point is there for quick starts, which helps the screw bite cleanly and get moving fast in dimensional lumber.
The head design is just as important as the thread. The rimmed flat head with nibs is built to countersink easily and leave a cleaner finished surface on deck boards. On visible exterior work, that means less fussing with proud heads and a more uniform final look. The tan finish is also intended to blend with many common wood tones, so the fastener does not stand out the way a bright plated screw can.
For exterior use, the Quik Guard coating is the spec to pay attention to. This coating is intended to provide corrosion resistance for exterior and certain preservative-treated wood applications. Simpson also lists compliance with ICC-ES AC257 exposure conditions 1 and 3 performance requirements. In plain terms, this screw is not just sized for deck work, it is also coated for the environment that deck work lives in.
Because this is a collated screw, it is built around speed and repeatability with the Quik Drive platform rather than hand-driving one loose fastener at a time. The DSVT3S is specifically listed for use with the Quik Drive PRO300SG2. That makes it a good fit for contractors and serious deck builders already running Quik Drive equipment, especially on large surfaces where stand-up fastening saves your knees and keeps lines moving.
In terms of size, you are getting a #10 x 3 inch wood screw with a 0.333 inch head diameter and T25 6-lobe drive. That combination is aimed at exterior deck board fastening and similar wood-to-wood applications where you need holding power, a clean seat, and compatibility with a production fastening system. The packaging quantity is 1000 screws, so this is clearly a production-minded pack rather than a small repair box.
This product makes the most sense for deck builders, remodelers, framing crews handling exterior wood assemblies, and serious DIY users who already own or plan to use the Quik Drive system. If you are hand-driving loose screws with a standard impact driver, this is not the right format. If you are running collated screws through a compatible Quik Drive deck fastening setup and want speed, cleaner starts, and exterior-ready protection, it is exactly the kind of screw you buy by the case and keep on the trailer.
Fast Decking Installation with Collated Feed
If your goal is to move across a deck fast and keep screw placement consistent, the collated format is the real advantage here. It is built for repetitive fastening on deck boards where speed and clean placement matter.
- Designed for wood-to-wood fastening in preservative-treated decking and other exterior applications
- Collated strip format supports production-style fastening with the Quik Drive system
Matched to the Quik Drive System
This is not a loose-box screw pretending to be a system fastener. The DSVT3S is specifically listed for the Quik Drive PRO300SG2, which keeps compatibility simple if you are already invested in that setup.
- Compatible tool listed as Quik Drive PRO300SG2
- T25 6-lobe drive interface for the correct bit engagement during installation
Thread and Head Design That Help on the Job
The details on this screw are there to solve real annoyances. Faster starts help reduce hesitation at the board surface, and the nibbed flat head is built to pull down and countersink with a cleaner finish.
- High-low threaded point for fast starts
- Rimmed flat head with nibs for easier countersinking and a finished appearance
What’s in the Box
- (1000) #10 x 3 inch T25 6-lobe tan collated wood screws
Quik Drive fastening tool and driver bit are not included.
Key Specifications
| Fastener Type | Quik Drive collated screw |
|---|---|
| Application | Wood-to-wood fastening |
| Screw Size | #10 |
| Length | 3 in. |
| Head Diameter | 0.333 in. |
| Drive Type | T25 6-lobe |
| Head Type | Rimmed flat head with nibs |
| Thread Type | Variable thread design |
| Point Type | High-low threaded point |
| Coating | Quik Guard coating |
| Color | Tan |
| Packaging Quantity | 1000 |
| Weight | 10.0 lbs |
Compatibility
Compatible Tool Listed for use with the Quik Drive PRO300SG2 fastening system. Drive Interface Uses a T25 6-lobe driver bit. Application Fit Designed for preservative-treated decking and exterior wood-to-wood fastening.
Built For
Deck Building Exterior Woodwork Remodeling General Contracting Wood-to-Wood Fastening Preservative-Treated Lumber
Pro Tip
If you are already running a Quik Drive stand-up deck setup, keep your screw collation and tool matched exactly to the PRO300SG2. That is what gives you smooth feed and consistent seating depth, which is the whole reason to buy collated deck screws instead of loose ones.
Tool Nut’s Take
Tool Nut’s Take
Simpson Strong-Tie DSVT3S Deck-Drive DSV Wood Screw for Fast, Clean Deck Work
This is a smart buy for anyone using the Quik Drive system and knocking out serious decking footage, because the screw design and collated format are both built to keep installation moving.
- Who it’s for: Deck builders, remodelers, and serious DIY users using a compatible Quik Drive fastening setup for exterior wood fastening.
- Why it stands out: You get low-torque driving, a clean countersinking head design, corrosion-resistant Quik Guard coating, and a collated format that actually saves time on repetitive work.
- Worth knowing: This is a system-specific fastener, not a loose screw box. Great if you have the PRO300SG2, not the right choice if you plan to drive everything by hand or with a regular impact driver.
Common Questions
- What is this screw designed for? It is designed for wood-to-wood fastening, especially preservative-treated decking and exterior wood applications.
- What tool is it compatible with? The DSVT3S is listed as compatible with the Quik Drive PRO300SG2.
- What size is the screw? This model is a #10 x 3 inch collated wood screw with a 0.333 inch head diameter.
- What kind of drive does it use? It uses a T25 6-lobe drive.
- Is it made for exterior use? Yes. It uses Simpson’s Quik Guard coating for corrosion resistance in exterior and certain preservative-treated wood applications, and it meets ICC-ES AC257 exposure conditions 1 and 3 performance requirements.
Reviews
There are no reviews yet.